Roll Length Calculator

[haai]

Hi,
I am new here
I found this on the internet, but I don't know anything about inches and feet.
What would be the metric formula (cm,cm,mm m)
see example
Thanks

 

[NARAYANK991]

Hi ,

See the attached file.

Narayan

 

[Belleke]

Thank you sir for helping sirn but you misunderstood me.
I want to enter outerdiameter in cm, corediameter in cm and tickness in mm or micron and then calculate the lenght in meter.
Metric only, not a conversion.

 

[NARAYANK991]

Hi ,

If the diameters are entered in centimetres , and the thickness in millimetres , the result in metres is given in the attached file.

Narayan

 

[haai]

Thank you sir
You're a true Ninja

 

[Alone In Californian Sky]

If the diameters are entered in centimetres , and the thickness in millimetres , the result in metres is given in the attached file.

Narayan

Hello Sir,

I have stumbled across this post and wondering if you can help. There is a spreadsheet attached with a layout to achieve the same result as above, but I can't work out how to adjust the formulas to output the right result.

The goal is to enter 2 dimensions and have formulas spit out 3 results depending on the edge thickness. Outer diameter in A14, Inner diameter in B14 will give results based on the material thickness.



Thanks to anyone who can solve my problem.

 

[vletm]

Alone In Californian Sky​

You should open a new tread for Your own question
... as You've read from Forum Rules.
This over four years ago opened thread is closed now.